• Ürün Özellikleri
  • Ödeme Seçenekleri
  • Yorumlar (0)
  • Tavsiye Et
  • Resimler
  • Beyerdynamic A 2 Premium kulaklık amfisi

    Beyerdynamic A 2 Ürünlerini Güncel fiyat, vade farksız 4 taksit seçenekleri ve kapıda ödeme imkanı ile sitemizden satın alabilirsiniz. SahneMarket - Kalite Sahnede
     
     FEATURES
    •  Discrete design of the integrated audio components
    •  Two 1/4' stereo headphone sockets (6.35mm) connected in
    • parallel
    •  Volume control for both headphone outputs via
    • motor-controlled high-quality ALPS potentiometer
    •  Backlit standby button (red/green)
    •  Two stereo inputs for two signal sources (RCA phono), one of
    • them is looped-through to connect signal sources with high
    • levels (CD player, DVD player) and amplifiers
    •  Two buttons, backlit in orange, to select the signal source
    •  Stereo output (RCA phono)
    •  Selectable gain (0 dB, -4 dB, +6 dB) and
    • output impedance (0 Ω, 100 Ω)
    •  Switchable supply voltage for 110 - 120 V and 220 - 240 V
    •  Remote control for all functions
    •  Headphone mute via

     DESCRIPTION
    The A 2 headphone amplifier is used to operate a maximum of two
    headphones. As the two headphone outputs are connected in
    parallel, the connected headphones should have the same nominal
    impedance between 16 and 600 ohms.
    The functions of the A 2 can be selected on the device itself or via
    the supplied infrared remote control. Furthermore, the headphone
    can temporarily be muted via the remote control.
    The components inside the device are illuminated in a warm orange
    glow and can be seen through a transparent cover, which is made
    of a special ceramic printed glass with wave-shaped windows.
    The special circuit design features an amazingly natural and brilliant
    sound reproduction with an excellent resolution and spatiality.
    Discrete components are exclusively used as audio components.
    They may be bigger and require more room, but they work more
    precisely and reliably.
    The volume control is made of solid aluminium with a high-grade
    motor-controlled ALPS potentiometer inside, which allows setting
    the volume via remote control. The selectable output impedance
    ensures an ideal control range of the volume potentiometer for all
    headphones no matter if they have a low or high impedance. With
    the selectable gain the A 2 can optimally be adjusted to the
    connected audio source.
    Due to a microprocessor-controlled intelligent relay, unpleasant
    cracking noise is avoided when turning the A 2 on-off or when
    changing the audio source.
    The gold-plated RCA connections on the rear allow the connection
    of audio sources and provide a signal transmission without loss. One
    input is passively connected with the line output of the A 2 to loop
    through incoming signals even when the A 2 is in standby mode. In
    this case the A 2 has only to be powered up if you want to listen to
    your music using your headphones. Two buttons to select the
    signal source are backlit in orange to indicate which signal input is
    currently active.
    The supplied headphone stand can be mounted to the bottom of
    the A 2 for storing the headphone.
    The selectable supply voltage of 110 - 120 V or 220 - 240 V allows
    the device to be used worldwide. 

    Technical Specifications

    Frequency response

    1 Hz - 100 kHz (-1 dB)

    Signal-to-noise ratio

    >101 dB (unweighted)

    T.H.D

    0.001% at 170 mW/250 Ω

    Input impedance

    50 kΩ

    Output impedance

    Headphone output 0 Ω/100 Ω

    (switchable)

    Output power

    100 mW / 600 Ω

    170 mW / 250 Ω

    150 mW / 32 Ω

    Channel separation L/R

    >89 dB

    Maximum gain

    18 dB

    Power supply

    110 - 120 V / 220 - 240 V

    (switchable), 50/60 Hz

    Power consumption (operation)

    <15 W

    Power consumption (standby)

    <0.45 W

    Audio connections

    2 x line input, gold-plated

    RCA phono sockets

    1 x line output, gold-plated

    RCA phono sockets

    2 x headphone output, 1/4'

    stereo jack (6.35 mm),

    gold-plated contacts

    Dimensions (W x D x H)

    216 x 235 x 55 mm

    Weight

    2230 g

    RC 2 remote control

    Dimensions (W x D x H)

    36 x 120 x 9 mm

    Weight

    36 g

    Battery

    1 x CR 2032

Benzer Ürünler
Whatsapp Destek Hattı x İletişime geçmek için hemen tıklayınız Tıklayınız
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.